*These values are typical properties and are not intended for use in preparing specifications.
- Color
- Black
- Red
- Translucent
- White
- Durometer - Shore A = 70 Shore A
- Elongation = 360 %
- Preform Type
- Specific Gravity @ 25C = 1.2
- Tear Strength = 126 ppi
- Tear Strength Die-Angle = 22 N/mm
- Tensile Strength = 1565 psi
- Tensile Strength Die 3 = 10.8 MPa
*These values are typical properties and are not intended for use in preparing specifications.
Cure Properties :
*For further details on the suitability of this product for food contact applications, please refer to the Food Regulatory Profile.
United States FDA Regulations
- 21 CFR Section 177.2600: "Rubber articles intended for repeated use". Finished article may contact food only under conditions B through H as described in table 2 of section 176.170(c).
|