*These values are typical properties and are not intended for use in preparing specifications.
- Cyclotetrasiloxane Content < 1 %
- Flash Point, Closed Cup = 76.6 Deg C
- Hydrophilic
- Kinetic / Kinematic Viscosity = 360 Centistokes
- Shelf Life = 900 Days
- Specific Gravity @ 25C = 1.03
- Water Dispersible
*These values are typical properties and are not intended for use in preparing specifications.
Feel :
Haircare Properties :
Skincare Properties :
- Improved Spreading
- Quick Absorption
- Smooth Feel
*For further details on the suitability of this product for food contact applications, please refer to the Food Regulatory Profile.
United States FDA Regulations
- 21 CFR Section 175.105: "Adhesives".
- 21 CFR Section 176.210: "Defoaming agents used in the manufacture of paper and paperboard".
- This product shall meet the requirements of the E.P.A. regulation "Code of Federal Regulations 40 CFR" concerning "Tolerances and Exemption from Tolerances for Pesticide Chemicals in or on Raw Agricultural Commodities" under Section 180.910: "Inert ingredients used pre- and post-harvest; exemptions from the requirement of a tolerance." (Prior to April 28th 2004 this was section 180.1001(c))
|
European Union Food Regulations
|
- - The composition of this product has been positively assessed according to German BfR Recommendation XV on Silicone for food contact (BfR-Empfehlungen XV zu Silicone), when cured as recommended by Dow Corning.
- - The composition of this product has been positively assessed according to German BfR Recommendation XXXVI on paper and board for food contact (BfR-Empfehlungen XXXVI zu Papiere, Kartons und Pappen für den Lebensmittelkontakt). This Recommendation is valid for paper or paperboard which is intended to be used at temperatures up to 90 °C (holding and reheating of food).
- - The composition of this product has been positively assessed according to German BfR Recommendation XXXVI/2 on Paper and Paperboard for Baking Purposes (BfR-Empfehlungen XXXVI/2 zu Papiere, Kartons und Pappen für Backzwecke).
- When used as additive for the manufacture of preparations from printing inks and varnishes intended for printing on the non-food contact surface of materials and articles: - The composition of this product has been positively assessed according to Swiss Ordinance of the FDHA on Materials and Articles (RS 817.023.21) of 23 November 2005, Section 8b on Packaging Inks. All substances present in this product are listed on Annex 6 Part A or Part B.
- None of the substances present in this product is currently subject to specification or restriction pursuant to Annex 6 of Swiss Ordinance of the FDHA on Materials and Articles (RS 817.023.21) of 23 November 2005
|
