*These values are typical properties and are not intended for use in preparing specifications.
- Flash Point, Closed Cup = 138 Deg C
- Solids Content = 99 %
- Specific Gravity @ 25C = 1.32
- Water Resistant
*These values are typical properties and are not intended for use in preparing specifications.
Resistance :
- Thermal Resistance
- Water Resistance
Thermal Properties :
*For further details on the suitability of this product for food contact applications, please refer to the Food Regulatory Profile.
United States FDA Regulations
- 21 CFR Section 175.300: "Resinous and polymeric coatings".
|
European Union Food Regulations
|
- - The composition of this product has been positively assessed according to German BfR Recommendation XV on Silicone for food contact (BfR-Empfehlungen XV zu Silicone), when cured as recommended by Dow Corning.
- - The composition of this product has been positively assessed according to German BfR Recommendation XXXVI on paper and board for food contact (BfR-Empfehlungen XXXVI zu Papiere, Kartons und Pappen für den Lebensmittelkontakt). This Recommendation is valid for paper or paperboard which is intended to be used at temperatures up to 90 °C (holding and reheating of food).
- When used as an additive or polymer production aid, and/or as monomer or other starting material for the manufacture of plastic materials and plastic articles: - The composition of this product has been positively assessed according to Commission Regulation (EU) No 10/2011 of 14 January 2011 on plastic materials and articles intended to come into contact with food, and amendments.
- - The composition of this product has been positively assessed according to German BfR Recommendation XXXVI/2 on Paper and Paperboard for Baking Purposes (BfR-Empfehlungen XXXVI/2 zu Papiere, Kartons und Pappen für Backzwecke).
- When used as additive for the manufacture of preparations from printing inks and varnishes intended for printing on the non-food contact surface of materials and articles: - The composition of this product has been positively assessed according to Swiss Ordinance of the FDHA on Materials and Articles (RS 817.023.21) of 23 November 2005, Section 8b on Packaging Inks. All substances present in this product are listed on Annex 6 Part A or Part B.
- This product contains substance(s) potentially influencing the volatile content in the finished product which should not exceed 0.5 % according to BfR Recommendation XV requirements.
- As a result of CAS 108-88-3 evaluation (officially recognized scientific testing)<(>,<)> a Specific Migration Limit (SML) of 1.2 mg/kg should not be exceeded.
|
