Hyloglue 1000 Technical Data Sheet

HYLOGLUE 1000
Description
Hyloglue 1000 is a high performance cyanoacrylate adhesive. The product is high viscosity and will
form a strong bond a wide range of substrates in seconds.
Typical Properties
Liquid Properties
Composition
Ethyl Cyanoacrylate
Appearance
Clear Liquid
0
Specific Gravity (25 C)
1.05 g/ml
0
Viscosity (25 C Cone and Plate)
Bonding Speed
Balsa Wood <2 seconds
Neoprene <5 seconds
Nitrile Rubber <15 seconds
Steel 
The Bonding Speed is
defined as the time taken to
develop at least 0.1 N/mm2
at 250C and 60% RH
<5 seconds
ABS 
Approx. 1000cps
<40 seconds
Tensile Strength (ATSM D412 [B])
Lap shear strength (ISO 4587)
Neoprene 10 N/mm2 Steel 20 N/mm2
Nitrile Rubber 10 N/mm2 ABS 8 N/mm2
EPDM 5 N/mm2 Polycarbonate 8 N/mm2
Temperature Resistance
100
80
60
40
20
0
0
20
40
60
80
100 120 140 160 180
The temperature resistance
test was carried out by
curing the product between
2 steel lap shears. The test
pieces where then left at the
test temperature for 1 hour.
A lap shear strength test
was then performed on
each sample.
Temperature (0C)
Information given in this publication is based upon technical data gained in our own and other Laboratories and is believed to be true. However the material is used in
conditions beyond our control thus we can assume no liability for results obtained or damages incurred through the application of the data present herein.
Hylomar Ltd, Cale Lane, Wigan WN2 1JT UK
Tel: +44 (0) 1942 617000
Fax: +44 (0) 1942 617001
Revision date
Product name
16.11.2012
Page 1
Hyloglue 1000 Version 1
of 2
Environmental Resistance
Exposed to the following conditions for 1000 hours at 250C
Condition
Ethanol
Water
Air
Petrol
Strength Retention
100%
60%
100%
90%
Instructions for Use
For best results ensure surfaces to be bonded are clean and free from grease. Apply the glue to one
of the substrates and bring the two objects together. Apply pressure to the joint, the length of time
depending on the material (see the “bonding speed” table for more information). Any excess product
can be cleaned using a suitable solvent such as acetone.
Safety
CAUTION: bonds skin and eyes in seconds – see safety data sheet for more information.
Storage
Shelf life is 12 months from date of manufacture when stored between 20C and 100C in original
unopened containers.
Packaging
Please contact our sales department for details.