Hylosil 607 RTV Silicone Technical Data Sheet

HYLOSIL 607
Automotive Oxime curing RTV silicone sealant
Description
Hylosil 607 is a neutral, non-corrosive, low odour, Room Temperature Vulcanising, (RTV) silicone
sealant/adhesive. It is a high performance engineering grade which is used in the automotive industry
and for general manufacturing. It can also be used in a variety of applications and is particularly
suitable for high strength applications in odour sensitive environments.
Hylosil 607 is a special purpose adhesive and sealant that can be used for a variety of applications. It
has good resistance to oils and aqueous anti-freeze agents
Unlike general-purpose silicone sealants, Hylosil 607 contains no solvents and does not evolve acetic
acid during cure.
Typical Properties, Uncured Product
Colour Black
Consistency Non-slump paste
Cross Linking System Oxime
Specific Gravity (DIN 53479) 1.17 g/ml
Extrusion Rate 3mm orifice @ 60 psi 85 g/minute
Skin Forming Time at 23°C/50% RH 10 minutes
Cure Rate @ 25°C and 60% RH 3mm per 24 hours
Cured Product
Tensile Strength DIN 53505, S3A 4.06 N/mm2
Elongation @ Break DIN 53504, S3A 300%
E Modulus @ 100% Elongation 1.39 N/mm2
DIN 53504, S3A
Hardness Shore A DIN 53505 34°
Shrinkage DIN 53504, S3A 3%
Typical temperature Range -40° to 250°C
Instructions for use
Ensure both surfaces to be bonded are clean, dry and free from contamination such as oil or
grease. The compound can be applied to form any size or shape of gasket.
Apply a bead directly onto one surface. Once applied, the joint should be assembled without
delay.
Information given in this publication is based upon technical data gained in our own and other Laboratories and is believed to be true. However the material is used in
conditions beyond our control thus we can assume no liability for results obtained or damages incurred through the application of the data present herein.
Hylomar Ltd, Cale Lane, Wigan WN2 1JT UK
Tel: +44 (0) 1942 617000
Fax: +44 (0) 1942 617001
Revision date
Product name
02.06.2010
Page 1
Hylosil 607 Silicone Sealant issue 6
of 2
Care should be taken to ensure any excess compound does not extrude internally and foul any
internal oil-ways or other channels and cause blockages. Any excess external product can be
wiped away with a damp cloth.
Typical Applications
Gasketing and sealing compound for automotive and engineering applications. The compound
readily adheres to most substrates.
Handling and Safety Properties
Risk Phrases
R21, R40, R41 and R43
Safety Phrases
S2, S13, S23, S26 and S36/37/39.
For further information please refer to the Safety Data Sheet
The shelf life of Hylosil 607 is 18 months when stored in original unopened containers between 5°
and 25°C.
Packaging
Hylosil 607 is available in; 300ml Cartridges and 17 litre kegs. For full details please contact our
sales department.