CONTRAM™ OF-G Industrial Bactericide

Fast-acting amine-free tankside performance

CONTRAM™ OF-G is a highly concentrated industrial bactericide based on (ethylenedioxy) dimethanol, an extremely effective anti-bacterial compound for use in aqueous metalworking fluids. This product offers fast-acting performance to maintain bacteria growth control and eliminate problematic bacteria contamination of in-use metalworking fluid dilutions. CONTRAM OF-G is proven to be highly effective against a wide variety of bacteria.

Enhanced Performance

• Fast-acting performance against bacteria for tankside application
• Complement to CONTRAM ST-1 protected fluids--alternate tankside chemistry to avoid microbe acclimation and resistance to one particular bactericide chemical type
• Amine-free option for applications where this is of concern to formulators and end users
• Near-neutral pH value to avoid dramatic shift in fluid properties when added tankside and to minimize impact on balance of fluid concentrates
• Safe and effective when applied and handled properly — not classified as a skin sensitizer

Typical Properties

Biocidal Efficacy

CONTRAM OF-G has demonstrated efficacy against a wide variety of bacteria, including the following typical metalworking fluid spoilage organisms:

Acremonium spec.
Candida albicans
Escherichia coli
Fusarium spec.
Klebsiella aerogenes
Legionella pneumophila
Mycobacterium immunogenum
Pseudomonas aeruginosa
Pseudomonas fluorescens
Pseudomonas putida
Staphylococcus aureus

Recommended Use Directions

CONTRAM OF-G is primarily recommended for tankside treatments to in-use metalworking fluid dilutions.

For tankside application, 1,000-2,000 ppm (0.10-0.20%) CONTRAM OF-G should be added based on the total diluted fluid volume.

Application of CONTRAM OF-G in metalworking fluid concentrates can also be considered, particularly in situations where a completely amine-free formulation is desired. Concentrate treat rates should be adjusted to deliver 1,000-2,000 ppm CONTRAM OF-G in the final working dilution.

In-Depth Industry Knowledge

Lubrizol’s comprehensive knowledge of the metalworking fluid industry helps us provide unequaled consultative support at all stages of the metalworking fluid application. From product development in the laboratory to troubleshooting challenges in the end use environment, we work with customers on specific formulation strategies to improve products or to help incorporate additives in existing product lines.

Assured Compliance

The active chemistry in CONTRAM OF-G is being supported by Lubrizol under the European Biocidal Products Directive (BPD). This places Lubrizol in the best position to assist our customers in the design of their concentrate formulations in full compliance with current legislation and to assist in developing products with the most suitable labeling for the end user application. Our commitment to this program ensures the longterm availability of this performance chemistry for the metalworking fluid industry.

Health and Safety

Lubrizol supports customers through:

• Product Safety and Compliance Department, providing expert communication and advice to help educate on product risk and proper handling
• mylubrizol.com, providing timely notification on the challenges and mandates driving the metalworking industry
• Commitment to the BPD, providing assurance through a comprehensive set of health and safety data for each of the active molecules in our product range.

Please note: Use biocides safely. Always read the label and product information before use.

When properly applied, these products will safely and effectively control the hazards of microbial growth in metalworking fluids.