MG-50â Moly Paste

MG-50â Moly Paste

MG-50 MOLY PASTE 
A low friction lubricant and anti-seize compound with Molybdenum Disulfide - MoS2. 
PRODUCT DESCRIPTION: 
  
    MG-50 Moly Paste is a non-melt base, low 
friction, extreme pressure grease that contains 
50% molybdenum disulfide. It contains a variety 
of other extreme pressure additives, rust and 
corrosion inhibitors as well as dry film lubricants 
combined with non-melt  thickeners with our 
finest petroleum base oil.    
    MG-50 provides exceptional wear resistance 
and will provide outstanding protection against 
galling, seizing and corrosion on metal surfaces.  
It has excellent adhesion to metal surfaces even 
when the surfaces have been exposed to oils.  
Therefore, offering outstanding resistance to 
water washout and protecting against the harsh 
effects of outdoor environments.
    MG-50 offers both high and low temperature 
performance and excellent load carrying ability 
under heavy loads, high speeds and close 
tolerance applications.   Thus, greatly extending 
the life of parts and equipment. 
   
The useful temperature range for various applications: 
  
 • For anti-seize use,  -10°F to + 750°F
 • As a bearing lubricant,  0°F to + 450°F
 • As a protective coating, -297°F to + 750°F 
FOR USE ON:  
  
    MG-50 Moly Paste can be used on bearings, 
bushings, slides, cams, journals, chains, sprockets, 
gears, keyways and shafts, new part assembly, pressfit applications, nuts, bolts, studs, flanges, gaskets, 
screws, taps, drills, valve and pump packing, valve 
stems, wire rope and cable, pipe threads and oilfield 
equipment.  Use for lubrication of various industrial, 
agricultural, construction and automotive machinery. 
Use in either high or low temperature applications.  
Withstands heavy loads and high torque.  Excellent for 
use on equipment that is subject to high temperatures, 
salt water spray, corrosive environments or equipment 
that is frequently steam cleaned. 
SPECIFICATIONS
Product Type.....…….............Low Friction Paste 
Product Color................….........……..…....Black 
Temp Range (Solids)..…..….....-297°F to +750°F 
Temp Range (Base Oil)..…...….... 0°F to +500°F 
Coefficient Of Friction ……............…........ 0.09 
Penetration (ASTM-D-217)...........…......NLGI 2 
Dropping Point (ASTM D-2265).......…......None
RESTRICTIONS:
As with all petroleum base anti-seizes, this product 
should NOT be used in oxygen service.