ตะกร้าสินค้าของคุณว่างเปล่า!
JET-LUBE : ECF
ราคา: 0.00บาท
ไม่รวมภาษี: 0.00บาท
ไม่รวมภาษี: 0.00บาท
จำนวน:
Benefits:
- Retains the equipment in serviceable condition.
- Environmentally preferred non-metallic petrochemical-grade anti-seize and thread lubricant.
- Biodegradable, non-bioaccumulation and non-toxic to all kinds of life forms.
- Outperforms all other products for applications where high nickel alloys are present, in extreme chemical exposure and corrosive environments, when long term protection is required for flange bolts and any surfaces needing protection against the elements.
- Offers superior adhesion to steel surfaces and the ability to withstand exposure to high salt and high humidity environments.
- Has controlled frictional characteristics so that the surfaces of the Nut & Bolt are torque to the designed K-Factor.
- Assures full hydraulic efficiency by allowing the metal surfaces to slide over each other without metal-to-metal contact.
Designed For:
Specially formulated and developed to prevent excessive over torquing issues and has a very high static friction factor of 0.15. The unique blend of complex thickeners and inert fillers are evenly distributed unto the metal threaded surfaces to eliminate metal-to-metal contact. This combination of non-metallic materials make this formula non-reactive to nickel alloys under high temp and low temp applications.
Recommended Application:
- Stud threads shall be thoroughly lubricated on both ends, fill the threaded area “Root – to – Crest” on the stud/bolt. The nut will push the anti- seize down the threads as it travels.
- Bearing surfaces between nut and hardened washer or nut and flange should be lubricated with anti -seize in the area where the nut will rest against the flange or washer.
- Anti-seize on the assembly should be easily visible.
เขียนข้อคิดเห็น
พิมพ์รหัสป้องกันสแปม:
