ตะกร้าสินค้าของคุณว่างเปล่า!
JET-LUBE : 550 ยังไม่ได้นำเข้าตัวเทียบแทน
ราคา: 0.00บาท
ไม่รวมภาษี: 0.00บาท
ไม่รวมภาษี: 0.00บาท
จำนวน:
Benefits:
- Retains the equipment in serviceable condition.
- Environmentally safe formula is free of sulfur, lead, copper, and other environmentally undesirable metals.
- Assures protection against rust, oxidation, and corrosion. It will not harden, evaporate, or settle out; and it requires no thinning.
- Water resistant and excellent for rough-cut threads made of cast iron, steel, and most alloys.
- Has controlled frictional characteristics so that the surfaces of the Nut & Bolt are torque to the designed K-Factor.
- Assures full hydraulic efficiency by allowing the metal surfaces to slide over each other without metal-to-metal contact.
Designed For:
Specially formulated to prevent excessive over torque issues and has a very high static friction factor of 0.17, the unique blend of complex thickeners to help evenly distribute the moly flake unto the metal surfaces to eliminate metal to threaded metal contact.
Recommended Application:
- Stud threads shall be thoroughly lubricated on both ends, fill the threaded area “Root – to – Crest” on the stud/bolt. The nut will push the anti-seize down the threads as it travels.
- Bearing surfaces between nut and hardened washer or nut and flange should be lubricated with ant -seize in the area where the nut will rest against the flange or washer.
- Anti-seize on the assembly should be easily visible.
เขียนข้อคิดเห็น
พิมพ์รหัสป้องกันสแปม:
