Klübersynth GH 6- 80 Synthetic gear and high temperature oils based on KlüberComp Lube Technology

Product description

Klübersynth GH 6 oils are gear oils on a polyglycol basis. They have a high scuffing load capacity and micro-pitting resistance. These oils have also proved their good wear protection in rolling bearings on the FAG FE8 test rig for gear oils. Klübersynth GH 6 oils stand out for their excellent ageing and oxidation resistance, good viscosity-temperature behaviour and very good thermal stability.

Benefits for your application

• The oils meet the requirements according to DIN 51517-3, CLP. Corresponding gears 
  can be switched to Klübersynth GH 6 oils without prior consultation provided the general application notes are observed.

• KlüberComp Lube Technology involves the selection of high-quality raw materials and individual consultation and services by Klüber Lubrication, ensuring high-performance lubrication of different gearbox components.

• As of ISO VG 220 the scuffing load stage API GL-5 is achieved. Gears are sufficiently
  protected against scuffing even under high peak loads.

• The oils' high micropitting resistance acc. to FVA 54 GFT ≥ 10 offers sufficient protection to gears that are subject to high loads and would normally be susceptible to this type of damage.

• Good wear protection prevents premature rolling bearing failure.

• Much longer service life than mineral oils due to the excellent ageing and oxidation resistance of the base oil; thus maintenance intervals can be extended and in certain cases even lifetime lubrication is possible.

• Owing to the wide service temperature range a single viscosity grade can cover both low and high temperatures in many applications.

• The optimum friction behaviour of the polyglycol base oil reduces power losses and improves efficiency.

• The excellent viscosity-temperature behaviour supports the formation of a sufficient lubricating film even at elevated and high temperatures.

• Seals made of 72 NBR 902 (except ISO VG 22), 75 FKM 585 and 75 FKM 170055 are resistant to Klübersynth GH 6 oils. Leakage and contamination are prevented.

• Approved by Siemens (Flender), Siemens Geared Motoros, SEW Eurodrive, Getriebebau Nord, Stöber Antriebstechnik, Lenze, ZAE Antriebssysteme, Bonfiglioli, Rossi Motoriduttori, Motovario, Moventas, Boston Gear, Baldor and many more.

เขียนข้อคิดเห็น

พิมพ์รหัสป้องกันสแปม: