ตะกร้าสินค้าของคุณว่างเปล่า!
Klübersynth GEM 4-320 N Synthetic high-performance gear and multipurpose oils based on KlüberComp Lube Technology
ราคา: 0.00บาท
ไม่รวมภาษี: 0.00บาท
ไม่รวมภาษี: 0.00บาท
จำนวน:
Product description
Klübersynth GEM 4 N oils are gear- and multipurpose oils based on polyalphaolefin. They have a high resistance to scuffing and micropitting as laid down in FVA 54.
Benefits for your application
-
The oils meet the requirements according to DIN 51517-3, CLP. Corresponding gears can be switched to Klübersynth GEM 4 N oils without prior consultation provided the general application notes are observed.
-
KlüberComp Lube Technology involves the selection of high-quality raw materials and individual consultation and services by Klüber, ensuring high-performance lubrication of different gearbox components.
-
Klübersynth GEM 4 N oils offer a high scuffing load resistance. Gears are sufficiently protected against scuffing even at high peak loads.
-
The oils' high micropitting resistance acc. to FVA 54 GFT ≥ 10 offers sufficient protection to gears that are subject to high loads and would normally be susceptible to this type of damage.
-
Good wear protection prevents premature rolling bearing failure.
-
Much longer service life than mineral oils due to the excellent ageing and oxidation resistance of the base oil; thus maintenance intervals can be extended and in certain cases even lifetime lubrication is possible.
-
Owing to the wide service temperature range a single viscosity grade can cover both low and high temperatures in many applications.
-
The optimum friction behaviour of the PAO base oil reduces power losses and improves efficiency.
-
The excellent viscosity-temperature behaviour supports the formation of a sufficient lubricating film even at elevated and high temperatures.
-
Seals made of 72 NBR 902, 75 FKM 585 and 75 FKM 170055 are resistant to Klübersynth GEM 4 N oils. Leakage and contamination are prevented.
-
Approved by Bosch Rexroth, SEW Eurodrive, Getriebebau Nord, Stöber Antriebstechnik, ZAE Antriebssysteme, David Brown, FLSmidth MAA Gears, ACCIONA ENERGY, etc.
เขียนข้อคิดเห็น
พิมพ์รหัสป้องกันสแปม:
