*These values are typical properties and are not intended for use in preparing specifications.
- Active Content 54 % to 58 %
- Color White
- Non-Ionic
- Solids Content 62 % to 66 %
*For further details on the suitability of this product for food contact applications, please refer to the Food Regulatory Profile.
United States FDA Regulations
- 21 CFR Section 176.210: "Defoaming agents used in the manufacture of paper and paperboard".
- This product shall meet the requirements of the E.P.A. regulation "Code of Federal Regulations 40 CFR" concerning "Tolerances and Exemption from Tolerances for Pesticide Chemicals in or on Raw Agricultural Commodities" under Section 180.920: "Inert ingredients used pre harvest; exemptions from the requirement of a tolerance." (Prior to April 28th 2004 this was section 180.1001(d)). Limitation: Amount in final product can not exceed 15%.
|
European Union Food Regulations
|
- - The composition of this product has been positively assessed according to German BfR Recommendation XXXVI on paper and board for food contact (BfR-Empfehlungen XXXVI zu Papiere, Kartons und Pappen für den Lebensmittelkontakt). This Recommendation is valid for paper or paperboard which is intended to be used at temperatures up to 90 °C (holding and reheating of food).
- When used as an additive or polymer production aid, and/or as monomer or other starting material for the manufacture of plastic materials and plastic articles: - The composition of this product has NOT been positively assessed according to Commission Regulation (EU) No 10/2011 of 14 January 2011 on plastic materials and articles intended to come into contact with food, and amendments.
- - The composition of this product has been positively assessed according to German BfR Recommendation XXXVI/2 on Paper and Paperboard for Baking Purposes (BfR-Empfehlungen XXXVI/2 zu Papiere, Kartons und Pappen für Backzwecke).
- The composition of this product has NOT been positively assessed according to Resolution ResAP(2004)5 on silicones used for food contact applications (Adopted by the Committee of Ministers on 1 December 2004 at the 907th meeting of the Ministers Deputies) (replacing Resolution AP (99) 3)
- When used as additive for the manufacture of preparations from printing inks and varnishes intended for printing on the non-food contact surface of materials and articles: - The composition of this product has been positively assessed according to Swiss Ordinance of the FDHA on Materials and Articles (RS 817.023.21) of 23 November 2005, Section 8b on Packaging Inks. All substances present in this product are listed on Annex 6 Part A or Part B.
- In accordance with BfR recommendation XV, coordination compounds of platinum should not exceed 50 mg/kg (Pt) in the finished material or article.
- FCM 575 present in this product meets the requirements set out in Regulation EU 10/2011.
|
