ตะกร้าสินค้าของคุณว่างเปล่า!
Hylomar Cleaner TDS
ราคา: 0.00บาท
ไม่รวมภาษี: 0.00บาท
ไม่รวมภาษี: 0.00บาท
จำนวน:
HYLOMAR CLEANER
Aerosol Solvent Cleaner
Description
Hylomar Cleaner is a specially blended cleaning fluid that is highly effective at removing used Hylomar
jointing compound from disassembled joint surfaces.
The unique mix of solvents also make it perfect for cleaning and degreasing surfaces prior to use with any of
Hylomar’s range of adhesives and sealants. Hylomar Cleaner is also very effective at removing uncured
anaerobic, uncured silicone and uncured epoxy products.
Typical Applications
Hylomar Cleaner can be used for:
Removing
Hylomar M, Hylomar Universal Blue, Hylomar AF and Hylomar Aerograde.
Uncured Hylogrip anaerobic products
Uncured Hylobond epoxy and acrylic adhesives
Hylotyte Red
Degreasing metal components – will remove most oils, lubricating fluids, metal cuttings and dirt from
any metal surface.
Hylomar Cleaner does not leave a residue and evaporates quickly after application.
Instructions for use
For the removal of used Hylomar jointing compound:
Spray Hylomar Cleaner liberally onto the used Hylomar jointing compound. Immediately wipe away the
residue with a cloth.
For cleaning surfaces prior to adhesive or sealant application:
Spray Hylomar Cleaner liberally onto the surface of the component to be bonded or sealed, wipe clean using
a cloth. Leave plenty of time for the solvent to evaporate before applying the sealant or adhesive.
To remove excess sealant or adhesive from the joint after assembly, liberally spray the cleaner onto a cloth
and wipe away the excess. Take care when spraying directly onto an assembled component as the solvent
may get into the joint itself and damage the seal.
Care should also be taken around painted and some plastic components as the solvent can discolour and
soften paints and plastics
Handling and Safety Properties
Hylomar Cleaner is extremely flammable. Please see the product safety data sheet for more information.
เขียนข้อคิดเห็น
พิมพ์รหัสป้องกันสแปม:
