Hylogrip HY2170 Technical Data Sheet

HYLOGRIP HY2170
Description
Hylogrip HY2170 is fast curing, single part anaerobic thread-locker. It is a very high strength, low
viscosity adhesive suitable for bonding all threaded metal assemblies. The low viscosity allows the
product to penetrate close fitting assemblies. When fully cured it is highly resistant to heat,
corrosion, vibrations, water, gases, oils, hydrocarbons and many chemicals.
Typical Properties
Uncured Material
Class of Locking (DIN 30661)
3 (High Strength – not to be
dismantled)
Composition
Anaerobic Methacrylate
Colour
Dark Green
Viscosity (Spindle No.1 @10rpm)
Approx. 500cps
Specific Gravity 1.1 g/ml
Max Thread Size M36
Max Gap Filling 0.20mm
Flash Point >1000C
Solvent Content
0%
Cured Material
Handling Cure Time
2-10 min
Functional Cure Time
1 hour
Full Cure Time
2-4 hours
Break Loose Torque (DIN 54454) (M10
Zinc phosphate nuts and bolts)
40 N/m
-55 to +1500C
Temperature Range
Instructions for Use
For best results ensure that both surfaces are clean, dry and free from contamination such as oil or
grease. Surfaces may be cleaned using Acetone or an equivalent product. Prior to assembly apply
sufficient product to fill the threads, put the nut on to the thread and tighten to the desired torque. After
tightening any excess Hylogrip HY2170 can be easily wiped away using a cloth soaked in Acetone or
a similar solvent.
Typical applications
Information given in this publication is based upon technical data gained in our own and other Laboratories and is believed to be true. However the material is used in
conditions beyond our control thus we can assume no liability for results obtained or damages incurred through the application of the data present herein.
Hylomar Ltd, Cale Lane, Wigan WN2 1JT UK
Tel: +44 (0) 1942 617000
Fax: +44 (0) 1942 617001
Revision date
Product name
13.11.2012
Page 1
Hylogrip HY2170 Version 1
of 2
Hylogrip HY2170 is a high strength general purpose thread-locking adhesive for use on nuts, bolts,
studs and any metal threaded components that do not require dismantling.
Handling & Safety Properties
Please refer to the product Safety Data Sheet.
Storage
Shelf life is 18 months from date of manufacture when stored below 250C in original unopened
containers. The shelf life will decrease if kept above 250C or if exposed to direct sunlight.
Packaging
Please contact our sales department for details.