Hylogrip HY6148 Technical Data Sheet

HYLOGRIP HY6148
Description
Hylogrip HY6148 is a fast curing single part, anaerobic, retaining adhesive for cylindrical parts. It
gives high strength, and low viscosity. When fully cured the product is highly resistant to heat,
corrosion, vibrations, water, gases, oils, hydrocarbons and many other chemicals.
Typical Properties
Uncured Material
Composition
Anaerobic Methacrylate
Colour
Dark Green
Viscosity (Spindle No.6 @ 2.5rpm) 500cps
Specific Gravity 1.1g/ml
Max Gap Filling 0.20mm
Flash Point >1000C
Solvent Content
0%
Cured Material
Handling Cure Time
2 – 10 minutes
Functional Cure Time
1 hour
Full Cure Time 2 - 4 hours
Shear Strength (DIN 54454) 35 N/mm2
-50 to +1800C
Temperature Range
Instructions for Use
For best results ensure that both surfaces are clean, dry and free from contamination such as oil or
grease. Surfaces may be cleaned using Acetone or an equivalent product. Prior to assembly apply
sufficient product to both surfaces. Assemble the components, taking care not to disturb them until
sufficient handling strength has developed. After initial cure any excess Hylogrip HY6148 can be
easily wiped away using a cloth soaked in Acetone or a similar product.
Typical applications
Hylogrip HY6148 is a high strength general purpose, retaining adhesive for use on cylindrical fitting
components including, bushings, sleeves, shafts and rotors.
Information given in this publication is based upon technical data gained in our own and other Laboratories and is believed to be true. However the material is used in
conditions beyond our control thus we can assume no liability for results obtained or damages incurred through the application of the data present herein.
Hylomar Ltd, Cale Lane, Wigan WN2 1JT UK
Tel: +44 (0) 1942 617000
Fax: +44 (0) 1942 617001
Revision date
Product name
03.01.2013
Page 1
Hylogrip HY6148 Version 1
of 2
Handling & Safety Properties
Please refer to the Safety Data Sheet.
Storage
To achieve maximum shelf life the product should be stored in the original, unopened container
below 250C.
Packaging
Please contact our sales department for details.