Large Reciprocating Lubricant XL-740HT

XL-740HT 
MATERIAL SAFETY DATA SHEET

1.  PRODUCT AND COMPANY IDENTIFICATION:  
     Product Name:  XL-740HT 
     Material:   Lubricant 
     Validation Date:  10/31/2007 
     Mixture-Chemical Family:  Inhibited Polyol Ester 
     Emergency Phone Number: 1-800-424-9300 
      
2.  HAZARDS IDENTIFICATION:  
     Physical State: Liquid 
     Odor: Mild 
     Color: Amber (Light) 
     Hazard Status: This material is classified as not hazardous under OSHA regulations in the United 
     States, the WHMIS in Canada, the NOM-018-STPS-2000 in Mexico and Brazil NBR 14725:2001. 
     Emergency Overview: No specific hazard. 
                                           USE WITH CARE. 
                                           Follow good industrial hygiene practice. 
     Routes of Entry: Dermal contact. Eye contact. Inhalation. Ingestion. 
     Potential Acute Health Effects:
Eyes: No know significant effects or critical hazards. 
Skin: No known significant effects or critical hazards. 
Inhalation: No known significant effects or critical hazards. 
Ingestion: No known significant effects or critical hazards. 
     Potential Chronic Health Effects:  
Chronic Effects: No known significant effects or critical hazards. 
Carcinogenicity: No known significant effects or critical hazards. 
             Mutagenicity:     No known significant effects or critical hazards. 
Teratogenicity:   No known significant effects or critical hazards. 
Developmental Effects: No known significant effects or critical hazards. 
Fertility Effects: No known significant effects or critical hazards. 
     Over-exposure signs / symptoms 
Inhalation: No specific data. 
Ingestion: No specific data. 
Skin:  No specific data. 
Eyes:  No specific data. 
     Medical conditions aggravated by over-exposure: None known. 
     See toxicological information (Section 11) 
3.  COMPOSITION/INFORMATION ON INGREDIENTS
     No hazardous ingredient. 
There are no ingredients present which, within the current knowledge of the supplier and in the concentrations 
applicable, are classified as hazardous to health or the environment and hence require reporting in this section. XL-740HT 
4.  FIRST AID MEASURES: 
     Eye contact: Check for and remove any contact lenses. In case of contact, immediately flush skin 
     with plenty of water for at least 20 minutes while removing contaminated clothing and shoes. Get 
     medical attention if irritation occurs. 
     Skin contact: Wash with soap and water. Get medical attention if irritation occurs. 
     Inhalation: If inhaled, remove to fresh air. If not breathing. Give artificial respiration. Get medical 
     attention if symptoms appear. 
     Ingestion: Do not induce vomiting. Never give anything by mouth to an unconscious person. Get 
     medical attention if symptoms appear. 
     Notes to physician: No specific treatment. Treat symptomatically. Contact poison treatment specialist 
     immediately if large quantities have been ingested or inhaled. 
     Protection of first-aiders: No action shall be taken involving any personal risk or without suitable 
     training. It may be dangerous to the person providing aid to give mouth-to-mouth resuscitation. Wash 
     contaminated clothing thoroughly with water before removing it, or wear gloves. 
5.  FIRE-FIGHTING MEASURES 
     Flammability of the product: In a fire or if heated, a pressure increase will occur and the container 
     may burst. 
     Hazardous combustion products: The final products of combustion are carbon oxides and water. 
     Nitrogen, sulfur and metal oxides may also be produced in some cases. 
     Extinguishing Media 
       Suitable: Use an extinguishing agent suitable for the surrounding fire. 
       Not Suitable: None known. 
     Special exposure hazards: Promptly isolate the scene by removing all persons from the vicinity of 
     the incident if there is a fire. No action shall be taken involving any personal risk or without suitable 
     training. 
     Special protective equipment for fire fighters: Fire fighters should wear appropriate protective 
     equipment and self-contained breathing apparatus (SCBA) with a full face-piece operated in positive 
     pressure mode.
      
6.  ACCIDENTAL RELEASE MEASURES
Personal precautions: No action shall be taken involving any personal risk or without suitable 
training. Evacuate surrounding areas. Keep unnecessary and unprotected personnel from entering. 
Do not touch or walk through spilled material. Avoid breathing vapor or mist. Provide adequate 
ventilation. Wear appropriate respirator when ventilation is inadequate. Put on appropriate personal 
protective equipment (see section 8). 
     Environmental precautions: Avoid dispersal of spilled material and runoff and contact with soil, 
     waterways, drains and sewers. Inform the relevant authorities if the product has caused environmental 
     pollution (sewers, waterways, soil or air). 
     Methods for cleaning up: Stop leak if without risk. Move containers from spill area. Approach release 
     from upwind. Prevent entry into sewers, water courses, basements or confined areas. Wash spillages 
     into an effluent treatment plant or procced as follows. Contain and collect spillage with non- 
     combustible, absorbent material e.g. sand, earth, vermiculite or diatomaceous earth and place in 
     container for disposal according to local regulations (see section 13). Dispose of via a licensed waste 
     disposal contractor. Contaminated absorbent materail may pose the same hazard as the spilled 
     product. Note: see section 1 for emergency contact information and section 13 for waste disposal. XL-740HT 
7.  HANDLING AND STORAGE
     Handling: Put on appropriate personal protective equipment (see section 8). Eating, drinking and 
     smoking should be prohibited in areas where this material is handled, stored and processed. Workers 
     should wash hands and face before eating, drinking and smoking. Do not breathe vapor or mist. Do 
     not ingest. Avoid contact with eyes, skin and clothing. Keep in the original container or an approved 
     alternative made from a compatible material, kept tightly closed when not in use. Empty containers 
     retain product residue and can be hazardous. Do not reuse container. 
     Storage: Store in accordance with local regulations. Store in original container protected from direct 
     sunlight in a dry, cool and well-ventilated area, away from incompatible materials (see section 10) and 
     food and drink. Keep container tightly closed and sealed until ready for use. Containers that have been 
     opened must be carefully resealed and kept upright to prevent leakage. Do not store in unlabeled 
     containers. Use appropriate containment to avoid environmental contamination. 
8.  EXPOSURE CONTROLS/PERSONAL PROTECTION
     Consult local authorities for acceptable exposure limits. 
     Recommended monitoring: If this product contains ingredients with exposure limits, personal, 
     workplace atmosphere or biological monitoring may be required to determine the effectiveness of the 
     ventilation or other control measures and/or the necessity to use respiratory protective equipment. 
     Engineering measures: No special ventilation requirements. Good general ventilation should be 
     sufficient to control worker exposure to airborne contaminants. If this product contains ingredients with 
     exposure limits, use process enclosures, local exhaust ventilation or other engineering controls to 
     keep worker exposure below any recommended or statutory limits. 
     Personal Protection: 
       Eye protection: Safety glasses with side shields. 
       Skin protection/body: Not applicable. 
       Respiratory protection: Not applicable. 
Hand protection: Natural rubber (latex). 
HMIS Code/Personal protective equipment: B 
       Personal protection in case of a large spill: Safety glasses, goggles or face shield. Impervious 
       gloves. Full suit. Boots. Wear MSHA/NIOSH-approved self-contained apparatus or equivalent and full 
       protective gear.  
       Hygiene measures: Wash hands, forearms and face thoroughly after handling compounds and 
       before eating, smoking and using the lavatory and at the end of the day. Follow good industrial 
       hygiene practice. 
     Environmental exposure controls: Emissions from ventilation or work process equipment should be 
       checked to ensure they comply with the requirements of environmental protection legislation. In 
       some cases, fume scrubbers, filters or engineering modifications to the process equipment will be 
       necessary to reduce emissions to acceptable levels.       
9.  PHYSICAL AND CHEMICAL PROPERTIES 
     Physical state: Liquid 
     Color: Green 
Odor: Mild 
     Specific Gravity: 0.96 
     Flash Point: Open cup: 254°C (489.2°F) (Cleveland). XL-740HT 
10. STABILITY AND REACTIVITY 
Stability and reactivity: The product is stable. 
Conditions of instability: None known. 
Incompatibility with various substances: Reactive or incompatible with oxidizing materials. 
Hazardous decomposition products: Under normal conditions of storage and use, hazardous 
decomposition products should not be produced. 
Hazardous polymerization: Under normal conditions of storage and use, hazardous 
polymerizations will not occur. 
Conditions of reactivity: None known. 
       
     
11. TOXICOLOGICAL INFORMATION:   
Acute effects:
  Eyes: No known significant effects or critical hazards.
  Skin:  No known significant effects or critical hazards. 
  Inhalation: No known significant effects or critical hazards. 
  Ingestion: No known significant effects or critical hazards. 
Potential Chronic Health Effects:  Carcinogenic effects: Not applicable.
                                                  Mutagenic effects: Not applicable. 
                                                                 Teratogenic effects: Not applicable. 
12.  ECOLOGICAL INFORMATION 
Environmental effects: No known significant effects or critical hazards.
 Other adverse effects: No known significant effects or critical hazards 
13.  DISPOSAL CONSIDERATIONS 
Waste disposal: The generation of waste should be avoided or minimized wherever 
 possible. Empty containers or liners may retain some product residues. This material and its 
 containers must be disposed of in a safe way. Dispose of surplus and non-recyclable products via a  
 licensed waste disposal contractor. Disposal of this product, solutions and any by-products should at 
 all times comply with the requirements of environmental protection and waste disposal, legislation 
 and any regional local authority requirements. Avoid dispersal of spilled material and runoff and 
 contact with soil, waterways, drains and sewers.
Disposal should be in accordance with applicable regional, national and local laws and regualtions. Refer to Section 
7: Handling and Storage and Section 8: Exposure Controls/Personal Protection for additional handling information 
and protection of employees. 
14.  TRANSPORT INFORMATION 
 NAERG: Not applicable. 
 Regulatory information:  
   UN/ IMDG/IATA DOT/TDG: Not regulated. XL-740HT 
15.  REGULATORY INFORMATION 
United States 
 HCS Classification: Not required. 
 U.S. Federal regulations:  TSCA 8(b) inventory: All components listed. 
SARA 302/304/311/312 extremely hazardous substances: No 
products were found. 
SARA 302/304 emergency planning and notification: No products 
were found. 
SARA 302/304/311/312 hazardous chemicals: No products were 
found. 
SARA 311/312 MSDS distribution – chemical inventory – hazardous 
identification: No products were found. 
    Clean Water Act (CWA) 307: No products were found. 
    Clean Water Act (CWA) 311: No products were found. 
Clean Air Act (CAA) 112 accidental release prevention: No products      
were found. 
Clean Air Act (CAA) 112 regulated flammable substances: No 
products were found. 
Clean Air Act (CAA) 112 regulated toxic substances: No products 
were found. 
State Regulations:   Connecticut Carcinogen Reporting: None of the components are 
listed. 
Connecticut Hazardous Material Survey: None of the components are 
listed. 
    Florida substances: None of the components are listed. 
    Illinois Chemical Safety Act: None of the components are listed. 
 Illinois Toxic Substances Disclosure to Employee Act: None of the 
  components are listed. 
    Louisiana Reporting: None of the components are listed. 
    Louisiana Spill: None of the components are listed. 
    Massachusetts Spill: None of the components are listed. 
    Massachusetts Substances: None of the components are listed. 
    Michigan Critical Material: None of the components are listed. 
    Minnesota Hazardous Substances: None of the components are listed. 
New Jersey Hazardous Substances: None of the components are 
listed. 
    New Jersey Spill: None of the components are listed. 
  New Jersey Toxic Catastrophe Prevention Act: None of the 
   components are listed. 
    New York Acutely Hazardous Substances: None of the components 
are listed. 
New York Toxic Chemical Release Reporting: None of the 
components are listed. 
    Pennsylvania RTK Hazardous Substances: None of the components 
are listed. 
Rhode Island Hazardous Substances: None of the components are 
listed. 
California Prop. 65:  No products were found. 
WHMIS (Canada):   Not controlled under WHMIS (Canada)
Canadian Lists:  CEPA Toxic substances: None of the components are listed. 
    Canadian ARET: None of the components are listed. 
    Canadian NPRI: None of the components are listed. 
    Alberta Designated Substances: None of the components are listed.XL-740HT 
         
Ontario Designated Substances: None of the components are listed.
    Quebec Designated Substances: None of the components are listed. 
    DSL; NDSL: All components are listed or exempted. 
This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations 
and the MSDS contains all the information required by the Controlled Products Regulations. 
Mexico 
Classification:  Health-0, Flammability-1, Reactivity-0 
This product, (and its ingredients) is (are) listed on national inventories, or is (are) exempted from being listed, in 
Australia (AICS), in Europe (EINECS/ELINCS), in Korea (TCCL), in Japan (METI), in the Philippines (RA6969). 
The Restriction of Hazardous Substances in Electrical and Electronic Equipment (ROHS) 
Directive (2002/95/EC): In compliance.      
 16. OTHER INFORMATION 
       Label Requirements: Use with care.       
       Hazardous Material Information System (USA): Health-0, Flammability-1, Physical hazards-0, 
       Personal protection-B. 
       National Fire Protection Association (USA): Health-0, Flammability-1, Instability-0 
References: ANSI Z400.1, MSDS Standard, 2004. – Manufacturer’s Material Safety Data Sheet. – 29CFR 
Part1910.1200 OSHA MSDS Requirements. – 49CFR Table List of hazardous Materials, UN#, Proper 
Shipping Names, PG. – Canada Gazette Part II, Vol. 122, No. 2. Registration SOR/88-64, 31 December 
1987. Hazardous Products Act “Ingredient Disclosure List” – Canadian Transport of Dangerous Goods, 
Regulations and Schedules, Clear Language version 2005. – Official Mexican Standards NOM-18-STPS-
2000 and NOM-004-SCT2-1994. Brazil NBP 14725:2001. 
Date of Issue:   10/31/2007 
Version:  1 
Notice to reader
To the best of our knowledge, the information contained herein is accurate. However, neither the above 
named supplier nor any of its subsidiaries assumes any liability whatsoever for the accuracy or 
completeness of the information contained herein. Final determination of suitability of any material is the 
sole responsibility of the user. All material may present unknown hazards and should be used with 
caution. Although certain hazards are described herein, we cannot guarantee that these are the only 
hazards that exist.