Super O-Ring Lubricant

Super O-Ring Lubricant

SUPER O-RING LUBRICANT 
 ~ Silicone Base ~ 
PRODUCT DESCRIPTION:
    Lub-O-Seal Super O-Ring Lube is a medium 
consistency silicone fluid based lubricating 
compound designed fore general lubrication in 
rubber to metal applications.  It is a translucent to 
white, greaselike material.  Super O-Ring Lube will 
not dry out in service and will retain its consistency 
at temperatures ranging from –50 to +500 F (-50 to 
+260 C).  It is non-corrosive, odorless, resistant to a 
variety of chemicals, and works well in lubricating 
most plastic and rubber components. 
CHEMICAL RESISTANCE:
    Super O-Ring Lube is not greatly affected by 
mineral or vegetable oils,  is generally resistant to 
dilute acids and alkalines, and to most aqueous 
solutions.  Because each application may vary in 
chemical composition, pressure, flow velocity, 
lubrication frequency and  equipment design, it is 
recommended that the silicone be tested before 
adopting for regular use.  This product should NOT 
be used in oxygen service or in applications 
requiring oxygen compatibility. 
FOR USE ON:
    Super O-Ring Lubricant can be used in a variety 
of applications requiring high lubricity or high 
release properties, moisture resistance and high 
dielectric.  
 • Lubricant & preservative for rubber & plastic 
   o-rings, gaskets and seals.
 • Lubricant for control and pressure valves 
 • High pressure pneumatic seals and o-rings 
 • Vacuum seals and o-rings 
 • Lubricant for rubber or plastic assemblies 
 • Protecting electronic ignition systems 
 • Moisture & chemical resistant barrier 
SPECIFICATIONS:
Penetration (Worked 60x) ………………………………  250 
Service Temperature ……………...……...…..  –50 to +500 F 
Melting Point ………………………...……………….   None 
Specific Gravity ……………………………………….   1.03 
Bleed (200 C / 24 Hrs) ……………………………….…   .16 
Evaporation (200 C / 24 Hrs) ………………..………….   1.7 
Dielectric Strength (50 mil) ……………………………   600 
Dielectric Constant (1 kHz) …………………………….   2.9 
Dissipation Factor ………………………………….    0.0015
  
RESTRICTIONS:
As with all petroleum base products, these lubricants should NOT be used in oxygen service.