Nickel Grade Anti-Seize

Nickel Grade Anti-Seize

NICKEL GRADE ANTI-SEIZE 
A high temperature anti-seize lubricant, sealant and thread compound. 
PRODUCT DESCRIPTION:
    Nickel Grade anti-seize provides outstanding 
protection against galling, seizing and corrosion 
on metal surfaces.  It is a superior anti-seize 
compound containing a variety of extreme 
pressure additives, rust and corrosion inhibitors as 
well as dry film lubricants combined with inert 
thickeners in a non-petroleum base oil.  Nickel 
Grade anti-seize adheres well to metal surfaces 
and offers exceptional water resistance. Severe 
temperature, vibration, expansion or contraction 
does not affect it.  Because it is free of copper, it 
can safely be used on stainless steel or other 
sensitive alloys.  Designed to meet or exceed the 
requirements of the US Military Spec MIL-PRF-
907E (Mil-A-907E). Nickel Grade anti-seize 
provides ultimate performance and hi-temp 
protection to + 2400°F. 
 • Meets US Military Spec:  MIL-PRF-907E
 • Can be safely used on stainless or other alloys  
 • Withstands high temperatures and high torque 
The useful temperature range for various applications: 
 • For anti-seize use, -30°F to + 2400°F
 • As a bearing lubricant, -30°F to + 450°F
 • As a slide lubricant, -30°F to + 1800°F
 • As a protective coating, -297°F to + 2400°F 
FOR USE ON:
    Nickel Grade Anti-Seize should be used on nuts, 
bolts, studs, screws, taps,  pipe threads, flanges, 
gaskets, o-rings, pump and valve packings and stems, 
low speed bearings, bushings, keyways and shafts, 
chains, sprockets, gears, exhaust manifolds, boilers, 
heat exchangers, battery posts, pneumatic equipment, 
wire rope and cable or use as a dry film lubricant on 
heat treated surfaces.  Excellent for use on equipment 
that is subject to salt water spray, highly corrosive 
environments or equipment  that is frequently steam 
cleaned. 
SPECIFICATIONS
Product Type....................Anti-Seize Compound 
Product Color..................................Silver / Gray 
Temp Range (Solids).............-297°F to +2400°F 
Temp Range (Base Oil).............-30°F to +500°F 
Coefficient Of Friction ……............…....... 0.14 
Penetration (ASTM-D-217)....................NLGI 2 
Dropping Point (ASTM D-2265).......….....None
RESTRICTIONS:
For applications that require the highest level of 
environmental or personal safety, try the Lub-O-Seal 
NM-91 Anti-Seize. NM-91 Anti-Seize contains NO 
metals yet still offers protection to + 2400°F.  As with 
all petroleum base anti-seizes, these products should 
NOT be used in oxygen service.