ES-90â Anti-Seize

ES-90â Anti-Seize

ES-90 ANTI-SEIZE 
A high temperature anti-seize lubricant, sealant and thread compound. 
PRODUCT DESCRIPTION:
    ES-90 anti-seize combines micro-sized copper 
flake and graphite particles in a non-melt, grease 
base.  ES-90 contains NO  lead, nickel or zinc, 
thus offering an environmentally safer alternative. 
It does contain a variety of other extreme pressure 
additives, rust and corrosion inhibitors as well as 
dry film lubricants combined with non-melt 
thickeners with our finest petroleum base oil.  
    ES-90 adheres well to metal surfaces and offers 
exceptional wear resistance.  Therefore it can 
provide outstanding protection against galling, 
seizing and corrosion on metal surfaces. Severe 
temperature, vibration, expansion or contraction 
does not affect it. ES-90 provides high temp 
protection to + 1800°F.  It is designed to meet or 
exceed the requirements of Military Specification 
MIL-PRF-907E (Mil-A-907E).  
 • Meets US Military Spec:  MIL-PRF-907E  
 • Withstands high temperatures and high torque 
The useful temperature range for various applications: 
 • For anti-seize use,  0°F to + 1800°F
 • As a bearing lubricant,  0°F to + 450°F
 • As a slide lubricant,  0°F to + 1800°F
 • As a protective coating, -297°F to + 1800°F 
FOR USE ON:
    ES-90 anti-seize should be used on pipe threads, 
oilfield equipment, nuts, bolts, studs, flanges, gaskets, 
screws, taps, drills, pump and valve packings and 
stems, low speed bearings, bushings, keyways and 
shafts, chains, sprockets, gears, wire rope and cable, 
exhaust manifolds, boilers, heat exchangers, battery 
posts or use as a dry film lubricant on heat treated 
surfaces.  Excellent for use on equipment that is 
subject to high temperatures, salt water spray, highly 
corrosive environments or equipment that is 
frequently steam cleaned. 
SPECIFICATIONS
Product Type....................Anti-Seize Compound 
Product Color............................………....Bronze 
Temp Range (Solids)..….........-297°F to +1800°F 
Temp Range (Base Oil)..…...….... 0°F to +500°F 
Coefficient Of Friction ……............…........ 0.18 
Penetration (ASTM-D-217)...........…......NLGI 2 
Dropping Point (ASTM D-2265).......…......None
RESTRICTIONS:
For applications that require the highest level of 
environmental or personal safety, try the Lub-O-Seal 
NM-91 Anti-Seize. NM-91 Anti-Seize contains NO 
metals yet still offers protection to + 2400°F.  As with 
all petroleum base anti-seizes, these products should 
NOT be used in oxygen service.