Centrifugal Lubricant

Ingersoll Rand's Techtrol Gold centrifugal lubricant is a super-refined synthetic fluid with exceptional performance and life that surpasses all other mineral based lubricants. Techtrol Gold has superior high temperature characteristics and a high viscosity index that protects the compressor over a wide range of operating temperatures.

Ingersoll Rand also carries OCV-Zero Fluid Lubricant, a diester based lubricant specifically designed for our CV0 centrifugal compressor model.

Centac Fluid
0CV ZERO FLUID LUBRICANT
MATERIAL SAFETY DATA SHEET
PRODUCT IDENTIFICATION: Synthetic hydrocarbons and additives (100%).
2.) INGREDIENTS:
Hazardous ingredients: none
Other Ingredients:
Synthetic Oils: > 75%
Additives And/Or Other Ingredients: < 5%
Proprietary Ester: < 20%
3.) PHYSICAL DATA:
Appearance: ASTM 1.0 liquid PH: Not Applicable
Boiling Point F (C): > 600 (316) Melting Point: Not Applicable
Vapor Pressure: < .l MM HG 20C Flash Point F (C): 415 (213) (ASTM D-92)
Relative Density 1514 C: 0.92 Percent Volatile: Not Established
Solubility In Water: Negligible Evaporation Rate: Not Established
Pour Point F (C): -80 (-62) Viscosity at 100 F, SUS: 72.4
Appearance: Light Amber Liquid 210 F, SUS: 38.8
Odor: Mild 40 C, CS: 13.7
100 C, CS: 3.8
4.) FIRE AND EXPLOSION HAZARD DATA :
Flash Point F (C): 415 (213) (ASTM D-92)
Flammable Limits: LEL: .6 UEL: 7.0
Extinguishing Media: Carbon Dioxide, foam, dry chemical and water fog.
Special Fire Fighting Procedures: Water or foam may cause frothing. Use water to keep fire exposed
containers cool. Water spray may be used to flush spills away from exposure. For fires in enclosed areas,
firefighter must use self-contained breathing apparatus. Prevent runoff from fire control or dilution from
entering streams or drinking water supply.
Unusual Fire Or Explosion Hazards: None
NFPA hazard ID: Health: 0, Flammability: 1. Reactivity: 0
5.) HEALTH HAZARD:
-Includes aggravated medical conditions, if established -
Effects Of Over Exposure: Not expected to be a problem. Prolonged repeated skin contact with low
viscosity materials may defat the skin resulting in possible irritation and dermatitis.Centac Fluid
0CV ZERO FLUID LUBRICANT
MATERIAL SAFETY DATA SHEET
© Copyright Ingersoll-Rand Company
Date: October 2008
Page 2 of 3
Form TF0053
6.) FIRST AID:
Eyes Contact: Wash with water.
Skin Contact: Wash contact areas with soap and water.
Inhalation: Not expected to be a problem.
Ingestion: Do not induce vomiting. Administer vegetable oil. Get medical assistance. (note to physician:
Material, if aspirated into the lungs, may cause chemical pneumonitis. Treat appropriately.)
7.) REACTIVITY DATA:
Stability: (Thermal, light, etc.): Stable
Condition To Avoid: Stable under normal conditions.
Incompatibility: (materials to avoid) Strong oxidizers.
Hazardous Decomposition: Burning produces carbon monoxide, phosphorus oxides and nitrogen oxides.
Hazardous Polymerization: Will not occur.
8.) SPILL OR LEAK PROCEDURES:
Environmental Impact: Report spills as required to appropriate authorities.
Procedures If Material Is Released Or Spilled: Adsorb on fire retardant treated sawdust.
diatomaceous earth, etc. Shovel up and dispose of at an appropriate waste disposal facility in accordance
with current applicable laws and regulations, and product characteristics at the time of disposal.
Waste Management: Product is suitable for burning in an enclosed controlled burner for fuel value or
disposal by supervised incineration. Such burning may be limited pursuant to the resource conservation
and recovery act In addition, the product is suitable for processing by an approved recycling facility or can
be disposed of at any government approved waste disposal facility. Use of these methods is subject to
user compliance laws and regulations and consideration of product characteristics at the time of disposal.
Do Not Reuse The Original Container.
9.) ENVIRONMENTAL AND DISPOSAL INFORMATION:
Environmental Impact: Report spills as required to appropriate authorities.
Steps To Be Taken In Case Of Spills: Soak up with suitable absorbent fire retardant material, shovel up
and dispose of at an appropriate waste disposal facility in accordance with current applicable laws and
regulations, and product characteristics at the time of disposal.
Waste Disposal Method: Dispose in accordance with local. state, or federal regulations.
Do Not Reuse The Original Container.
10.)SPECIAL PROTECTION INFORMATION:
Exposure Guidelines: Non-established
Ventilation: No special requirements under ordinary conditions of use with adequate ventilation.
Respiratory Protection: No special requirements under ordinary conditions of use and adequate
ventilation.
Skin Protection: No special equipment required. However, good personal hygiene practices should always
be followed.
Eye Protection: Safety glasses
Special Handling And Storage: Reasonable care should be taken in handling this product.Centac Fluid
0CV ZERO FLUID LUBRICANT
MATERIAL SAFETY DATA SHEET
© Copyright Ingersoll-Rand Company
Date: October 2008
Page 3 of 3
Form TF0053
11.)REGULATORY INFORMATION:
Government Inventory Status: All components registered in accordance with TSCA.
D.O.T. Shipping Name: Not applicable.
D.O.T. Hazard Class: Not applicable.
US OSHA Hazard Communication Standard: Product assessed in accordance with OSHA 29 CFR
1910.1200 and determined not to be hazardous.
RCRA Information: The unused product is not specifically listed by the EPA as hazardous waste (40CFR.
part 261D); does not exhibit the hazardous characteristics of ignitability, corrosively, or reactivity, and is
not formulated with metals cited in the EP toxicity test However the used product may be regulated.
According to the U.S. superfund amendments and reauthorization act (SARA) title Ill, this product
contains the following extremely hazardous substances (EHS).
Chemical name (CAS-number) PCT TPQ (lbs.) RQ (lbs.)
Aniline (62-53-3) <.0001 1000 5000
Product quantity (lbs.) which results in RQ of an EHS: > 100000
The following product Ingredients are cited on the lists below:
Chemical name  (CAS-number) List citations