Anti-Seize Aerosol

Anti-Seize Aerosol

 High-temp anti-seize for use on all threaded connections.

REGULAR GRADE ANTI-SEIZE 
A high temperature anti-seize lubricant, sealant and thread compound. 
PRODUCT DESCRIPTION:
   Regular Grade anti-seize provides outstanding 
protection against galling, seizing and corrosion 
on metal surfaces.  Because it is free of copper, it 
can safely be used on stainless steel or other 
sensitive alloys. Regular Grade anti-seize 
compound contains a variety of extreme pressure 
additives, rust and corrosion inhibitors as well as 
dry film lubricants combined with inert thickeners 
in a non-petroleum base oil.  Regular Grade antiseize adheres well to metal surfaces and offers 
exceptional water resistance. Severe temperature, 
vibration, expansion or contraction does not affect 
it.  Designed to meet or exceed the requirements 
of Military Spec MIL-PRF-907E.  Regular Grade 
anti-seize provides ultimate performance and hitemp protection to + 2200°F.
 • Meets US Military Spec:  MIL-PRF-907E
 • Can be safely used on stainless or other alloys  
 • Withstands high temperatures and high torque 
The useful temperature range for various applications: 
 • For anti-seize use, -30°F to + 2200°F
 • As a bearing lubricant, -30°F to + 450°F
 • As a slide lubricant, -30°F to + 1800°F
 • As a protective coating, -297°F to + 2200°F 
FOR USE ON:
    Regular Grade Anti-Seize should be used on nuts, 
bolts, studs, screws, taps, drills, pipe threads, flanges, 
gaskets, o-rings, pump and valve packings and stems, 
low speed bearings, bushings, keyways and shafts, 
chains, sprockets, gears, wire rope and cable, exhaust 
manifolds, boilers, heat exchangers, battery posts, 
pneumatic equipment, hydraulic cylinders and shafts 
or use as a dry film lubricant on heat treated surfaces.  
Excellent for use on equipment that is subject to salt 
water spray, highly corrosive environments or 
equipment that is frequently steam cleaned. 
SPECIFICATIONS
Product Type....................Anti-Seize Compound 
Product Color..................................Silver / Gray 
Temp Range (Solids).............-297°F to +2200°F 
Temp Range (Base Oil).............-30°F to +500°F 
Coefficient Of Friction ……............…....... 0.14 
Penetration (ASTM-D-217).................NLGI 1.5 
Dropping Point (ASTM D-2265).......….....None
RESTRICTIONS:
For applications that require the highest level of 
environmental or personal safety, try the Lub-O-Seal 
NM-91 Anti-Seize. NM-91 Anti-Seize contains NO 
metals yet still offers protection to + 2400°F.  As with 
all petroleum base anti-seizes, these products should 
NOT be used in oxygen service.